6-30
Programming an RS-232 Service Modem Card,
Continued
Table 6-11. Service Modem Commands,
continued
Command
Explanation/Examples
TYPE
Sends a report to the terminal (PC) from which the command was issued. The TYPE command must
be followed by one of the following qualifiers:
ALOG Prints the alarm log.
TLOG Prints the trouble log.
SLOG Prints the supervisory log.
CLOG Prints the combined log.
TASERV Prints a LIFEalarm service report.
TASTAT Prints a LIFEalarm status report.
DIS*ABLE
Allows the user to disable/enable points.
Disabling a Point.
Enter the DISABLE command, followed by a point and the ON qualifier. For
example:
-DISABLE P260 ON
Enabling a Point.
Enter the DISABLE command, followed by a point and the OFF qualifier. For
example:
-DISABLE P260 OFF
CTRL+A
CTRL+S
CTRL+D
Three control key commands are supported:
CTRL+A Acknowledges the highest priority abnormal point.
CTRL+S Alarm Silence.
CTRL+D System Reset.
