Addresses for Hardware Points,
Continued
A-22
LCD Card,
continued
included on the LCD card. In this table, card represents the card address (9-14) of the LCD
Annunciator card.
AUTOPULSE Z-28 ExtA
Card
The AUTOPULSE Z-28 ExtA Card, which always resides at card address 17, is a unique card
in the AUTOPULSE Z-28 system. The AUTOPULSE Z-28 ExtA card itself is a pseudo card,
which means that an actual hardware "card" does not exist at address 17. However, unlike
other pseudo cards in the system, the points on the AUTOPULSE Z-28 ExtA pseudo card track
the status of actual hardware points. The points on the AUTOPULSE Z-28 ExtA Card are used
to control and track the status of the NAC circuits found on all of the AUTOPULSE Z-28 ExtA
devices configured in the system. Therefore, the number of configured points on the
AUTOPULSE Z-28 ExtA Card may vary, depending on the number of AUTOPULSE Z-28
ExtA devices configured in the system. The AUTOPULSE Z-28 can have up to five
AUTOPULSE Z-28 ExtA devices programmed into the system, with each AUTOPULSE Z-28
ExtA device having up to 8 NAC points, and 8 card status points associated with it. An
overview of how the AUTOPULSE Z-28 ExtA points are configured, and how these points are
associated with a specific AUTOPULSE Z-28 ExtA device, is provided in the following
sections.
Continued on next page
Table A-9LCD Card Points
Point
Label
Description
card-1
LCD Card #,
Point 1
The status of the First User LED on the LCD card.
Programmable for color and mode.
card-2
LCD Card #,
Point 2
The status of the Second User LED on the LCD card.
Programmable for color and mode.
card-3
LCD Card #,
Point 3
The status of the Third User LED on the LCD card.
Programmable for color and mode.
card-4
LCD Card #,
Point 4
The status of the Alarm Silence LED on the LCD card.
card-5
LCD Card #,
Point 5
The status of the Piezo sounder on the LCD card.
