11-2
Building a Job
Overview
This section describes using the PC Programmer’s Job Builder utility to create a Configuration
Data file (CFIG), and download it to the AUTOPULSE Z-28 FACP.
Using Job Builder
The Job Builder utility does the following:
•
Automatically saves the job being built.
•
Verifies that the hardware and the configured points are accurate.
•
Produces the CFIG file.
To build a job, follow these steps:
1.
Click on the Build menu and choose the Build option.
The Job Builder dialog appears, displaying the progress of the job build in the window.
2.
Click on OK when the job is finished building.
Figure 11-1. Job Builder Dialog
