Anderson GB series, Operation Manual

Page: 61 / 79

Anderson Group Grain bagger GB-series – Operation Guide 61
Carefully clean the greasing caps before injecting grease. This will avoid dust, mud or impurities
from entering the grease at the greasing points, which would reduce or cancel out the lubricating
action.
Groupe Anderson recommends using grease designed to be weather resistant and which do not dry
too quickly.
Groupe Anderson recommands using a greasing gun equipped with a flexible cap for an easier
access to the different greasing points.
Store the lubricants in containers in
appropriate places and dispose of them
appropriately.
Grease after every 10 hours of use
Figure 41 – Drive shaft crossbearing and guards