Anderson GB series, Operation Manual

Page: 54 / 79

54 Operation Guide – Grain bagger GB-series Anderson Group
Figure 36 – Sticker for the adjustment of the pressure between the rollers
When you adjust the pressure on the springs, make sure the part (A) is aligned with the green
section on the pressure indicator sticker (see Figure 37 – Pressure indicator sticker). You can tighten
the springs so that the part is in the yellow zone for finer crushing, but avoid the red zone. You could
damage the rollers if a foreign body that is too hard passes between them.
Figure 37 – Pressure indicator sticker
Roller spacing
The minimum space between the rollers can be modified according to the desired type of grain or
crushed grain refinement. This spacing is adjusted with a bolt located at each end of the casing,
between the crushing rollers. The length of the bolts determines the roller spacing.