Anderson GB series, Operation Manual

Page: 59 / 79

Anderson Group Grain bagger GB-series – Operation Guide 59
5 Maintenance and tunings
This chapter explains how to perform maintenance and tuning for your bagger in order to ensure its
correct operation and prevent premature wear.
Before beginning preparation, maintenance or
cleaning work, shutdown the tractor engine,
remove key from ignition and disconnect the
power takeoff drive .
During maintenance, it is important comply with
standard safety rules. Consult section 2 to learn
these safety measures.
It is important to respect the frequency of
maintenance and tunings. Consult section 5.1 to
learn the necessary maintenance and tunings
and their frequency.
5.1 Maintenance and tunings frequency
The following table indicates the recommended frequency for each maintenance and tuning.
Maintenance and tunings Frequency
See sec-
tion
Wheel and tire verification After the first 10 hours
Then, after every 50 hours of
use
5.2
Greasing the drive shaft Every 10 hours 5.3
Greasing the pivot points Every 50 hours 5.3
Greasing the front bearing of the compression
screw Every 100 hours 5.3