Anderson GB series, Operation Manual

Page: 35 / 79

Anderson Group Grain bagger GB-series – Operation Guide 35
3 Preparation and startup
3.1 Moving the bagger
You can move your bagger by towing it with a tractor or truck. To do so, proceed as follows:
1. Stop the power takeoff.
2. Open the valves (A) and (B) of the manual pump and ensure the pressure is neutral in the
braking system.
3. Make sure the hopper is completely empty.
4. Elevate the rear plate by pulling on the handles on each side of the tunnel.
Figure 14 – Manual pump valves
Put away the loading auger
1. Attach the connecting rod (A) onto the machine with pins (B).
2. Turn the hopper so that the loading auger is at the back of the machine and place it onto the
connecting rod (A).
3. Attach the other end of the connecting rod to the loading screw support with a pin (C).
4. Insert the T-shaped blocking pin (D) at the base of the hopper to prevent it from turning dur-
ing transportation.