Anderson GB series, Operation Manual

Page: 47 / 79

Anderson Group Grain bagger GB-series – Operation Guide 47
4 Operation
4.1 Bagging
All the operations described below must be
done by a qualified person that has read and
understood the instructions in this manual.
Keep hands and feet away from the machine
until it is harnessed to the tractor or it is in
operation.
Before beginning to work with the machine,
the operator must perform all the verifications
listed in section 3.7.
Then, while the operator uses the machine,
safety rules described in section 2 must be
followed at all times.
When you are ready to begin bagging, proceed as follows:
1. Put the gearbox in neutral and take off the hand brake.
None of the tractor brakes must be engaged
during bagging.
2. Idle the power takeoff and increase the RPM to 540.
During bagging, the tractor wheels must be
perfectly straight so the grain bag is straight.
You can readjust the orientation of the wheels
if necessary.