![background image](http://html1.mh-extra.com/html/amx/modero-nxd-cv17/modero-nxd-cv17_operation-reference-manual_2938955029.webp)
CV17 Touch Panel Accessories
19
CV17 17" Modero Coor Video Touch Panels
4.
Remove the I/O connector plate by using a grounded Phillips-head screwdriver to remove the two screws
and slide the I/O connector plate away from the back box housing.
5.
Unscrew the four pan-head Housing Screws from the rear of the NXD unit. These four screws secure the
back box to the internal panel casing (FIG. 21).
6.
Lift the outer housing from the internal panel casing to access the internal circuit board (FIG. 21).
FIG. 20
Screw locations on the attached I/O connector plate on an NXD panel
FIG. 21
Location of the housing screws on a sample NXD panel
Remove these 2 screws
removing the outer housing
and the Stereo Output nut
before
I/O connector plate
Outer housing (back box)
Stereo Output nut
Pan-head
Metallic panel
Memory Module
Compact Flash
Outer housing
DO NOT REMOVE
(Backbox)
Housing
Screws (4)
Summary of Contents for modero NXD-CV17
