AMX modero NXD-CV17, Operation/Reference Manual

Page: 13 / 168

Introduction
3 CV17 17" Modero Coor Video Touch Panels
Product Specifications (Cont.)
Front Panel Components:
Light sensor: • Photosensitive light detector for automatic adjustment of the panel
brightness (dim room results in a dimmer LCD display and a bright room
results in a brighter LCD display).
Note : The light sensor can be adjusted via the Sensor Setup page
(page 91).
Motion sensor (PIR): • Proximity Infrared Detector to wake the panel when the panel is
approached.
• Activation range: + 20° vertically from center and + 45° horizontally
from center.
Note : The motion sensor can be adjusted via the Sensor Setup page
(page 91).
Front setup access button: • Provides both access to the Setup and Calibration page and toggles the
panel between a "sleep" or "wake" state.
- When wired, "sleep" status means the backlight is Off.
- When battery operated, wireless "sleep" status means the touch panel
base is either Off or "suspended".
Microphone: • Used for intercom applications (must be using the NXA-AVB Breakout
Box).
Speakers: • Stereo output with a frequency response of 450 Hz - 7 KHz
PCMCIA card slot: • Provides optional wireless connectivity (using the NXA-WC80211b AMX
Wireless Interface Card). Refer to the NXA-WC80211b Wireless Interface
Card section on page 13 for more information).
Headphone connector: • Stereo output through a 3.5mm mini-jack (for use with external speakers).
Audio/Video connector: • RJ-45 connector cable for audio/video signals between the NXA-AVB
Breakout Box and the panel.
• In-bound audio (from the Breakout Box) gets directed to the speakers.
• Out-bound audio is sent from the on-board microphone (on the front-
panel).
Ethernet 10/100 port: • RJ-45 port for 10/100 Mbps communication. The Ethernet port
automatically negotiates the connection speed (10 Mbps or 100 Mbps),
and whether to use half duplex or full duplex mode.
Ethernet 10/100 LEDs: • LEDs show communication activity and connection information:
A -activity - Yellow LED lights when receiving or transmitting Ethernet data
packets.
L -link - Green LED lights when the Ethernet cables are connected and
terminated correctly.
ICSNet connector: • RJ-45 connector for ICSNet communication from the NXA-AVB Breakout
Box.
PWR: • 2-pin mini-Phoenix (12 VDC) power supply jack.
Supported Audio Sample Rates: • 48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz, 12000Hz,
11025Hz, and 8000Hz.
Operating / Storage
Environment: • Operating Temperature: 10° C (50° F) to 40° C (104° F)
• Operating Humidity: 20% to 85% RH
• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% to 85% RH
Included Accessories: • Installation Kit for NXD-CV17 panels (KA2250-03):
- 2-pin mini-Phoenix connector (41-5025)
- Four Phillips-head screws (#6-32 x 0.250 Black) (80-0135-01)
- Four Drywall clips (62-5924-05) and #6 -metal strips (80-0192)
• Modero Table Top Cable (CA2250-50) provided with all NXT Table Top
panels.