![background image](http://html1.mh-extra.com/html/amx/modero-nxd-cv17/modero-nxd-cv17_operation-reference-manual_2938955095.webp)
Firmware Pages and Descriptions
85
CV17 17" Modero Coor Video Touch Panels
Protected Setup Page
This button opens the Protected Setup page which centers around the properties used by the panel to properly
communicate with the NetLinx Master. Refer to both the
Protected Setup Navigation Buttons
section on
page 87 and the
Protected Setup Page
section on page 88 for more detailed information.
Battery Base Page
This page (FIG. 79) allows you to alter/set the power warning preferences, monitor battery status information,
and alter the display times for the battery warnings. The fields on this page are populated with information
after the panel is connected to an optional NXA-BASE/B Battery Base containing up to two NXT-BP batteries.
Video Setup Page Elements
Back:
Saves the changes and returns you to the previously active touch panel page.
Connection Status icon:
This visual display of the connection status allows the user to have a current
update of the panel’s connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (
requiring a username and password
).
Settings:
• The
Default Settings
button sets the video settings to their default values
(indicated in this table).
• The
Undo Changes
button disregards any changes made on the page since
the last settings were saved.
• The
Save Settings
button saves any changes made to the Video Setup page.
Video Settings:
• The
Black & White
button toggles the Black & White display mode.
Default = Off.
• The
Sharpness
button toggles the Interpolate (Sharpness) feature.
Default = On.
• The
Interlace
button toggles the Interlacing feature.
Default = On.
Status:
Displays whether or not a video-sync signal is detected.
Format:
Allows you to press the blue
Format
field and cycle through a choice of
available video formats (NTSC, PAL, SECAM, or Auto detect).
• Default = Auto.
Brightness:
Use the UP/DN buttons to alter the brightness level of the incoming signal.
• Range = 0 - 255, default = 128.
Contrast:
Use the UP/DN buttons to alter the contrast level of the incoming signal.
• Range = 0 - 255, default = 128.
Saturation:
Use the UP/DN buttons to alter the color saturation level of the incoming signal.
• Range = 0 - 255, default = 128.
Hue:
Use the UP/DN buttons to alter the hue level of the incoming signal.
• Range = 0 - 255, default = 128.
FIG. 79
Battery Base page
Summary of Contents for modero NXD-CV17
