AMX modero NXD-CV17, Operation/Reference Manual

Page: 34 / 168

CV17 Touch Panel Accessories
24 CV17 17" Modero Coor Video Touch Panels
Charging the NXT-BP batteries with the NXA-BASE/B
1.
Follow the procedures from the previous sub-section to attach the NXT-CV17 to the NXA-BASE/B.
2.
Insert each battery into the battery compartment shown in FIG. 27 on page 24.
3.
Insert a 2-pin connector from a power supply to the rear PWR connector on the NXT-CV17 Modero
panel.
The charge status bargraph indicators, on the Battery Base page, indicate when the batteries are fully
charged.
NXT-CHG Battery Charger Kit (FG2255-50K)
The NXT-CHG Kit includes one charger and two batteries. The optional NXT-CHG Modero Power Station
(FIG. 28) is a two-slot, stand-alone battery charger that can be used to recharge up to two NXT-BP batteries.
The batteries are charged in the order they are inserted into the charger.
The NXT-CHG Slot 1 has the feature of being able to completely discharge and recharge ( recalibrate ) a
battery.
FIG. 27 Battery installation procedure
Battery
Compartment
NXT-BP Battery #2
Battery
Connectors
Battery
Connector
Port
Interface
connector
FRONT
NXT-BP Battery #1
Battery #2
slot
The NXA-BASE/B will only charge batteries when the NXT panel is in Sleep mode.
FIG. 28 NXT-CHG Kit (consists of one NXT-CHG charger and two NXT-BP batteries)
NXT-CHG Modero Power Station (charger)
NXT-BP Modero Power Pack (battery)
Battery Life indicator