AMX modero NXD-CV17, Operation/Reference Manual

Page: 30 / 168

CV17 Touch Panel Accessories
20 CV17 17" Modero Coor Video Touch Panels
Step 2: Installing the Upgrade Compact Flash Card (NXD)
Complete the procedures outline within the Step 2: Installing the Upgrade Compact Flash Card section on
page 17 and then continue with the following Step 3.
Step 3: Replacing the NXD Outer Housing
1.
Once the card has been securely installed, gently place the outer housing back onto the metallic panel
casing (with the connector opening on the right-side of the panel) and align the four
pan-head Housing Screw holes along the edges of the outer housing.
2.
Gently place the outer housing back onto the metallic panel casing (with the connector opening on the
right-side of the panel) and align the four pan-head Housing Screw holes along the edges of the outer
housing.
3.
Insert and secure the four pan-head Housing Screws (FIG. 21) into the pre-drilled holes along the edges
of the NXD unit by using a grounded Phillips-head screwdriver.
4.
Reinstall the I/O connector plate by aligning all connectors to their respective locations.
5.
Secure the I/O connector plate using a grounded Phillips-head screwdriver and then twist the Stereo
Output nut back into the Stereo Output jack, as seen in FIG. 20.
NXT-BP Power Pack (FG2255-10)
The NXT-BP Power Pack (FIG. 22) is a rechargeable Lithium-Ion "smart" battery used to provide power to the
NXT Modero panel through the NXA-BASE/B Battery Base. This battery incorporates an on-board battery
life indicator.
The NXT-BP battery can be charged through either the base (when connected to the CV17 panel) or through
an optional NXT-CHG Modero Power Station. Extra NXT-BP Power Packs (
FG2255-10 ) can be purchased
separately as an optional accessory.
Product Specifications
FIG. 22 NXT-BP Power Pack
NXT-BP Specifications
Dimensions (HWD):
• 0.69" x 3.50" x 5.81" (1.75 cm x 8.89 cm x 14.76 cm)
Power (Voltage): • 11.1 Volts (nominal)
Weight: • Single NXT-BP Power Pack: 1.0 lbs (0.45 kg)
Features: • Battery Usage: 4 to 8 hours (time is usage dependant)
• Charge Capacity: 6300mAh
Operating / Storage
Environment: • Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 20% - 85% RH
• Storage/Discharge Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% - 85% RH