![background image](http://html1.mh-extra.com/html/amx/modero-nxd-cv17/modero-nxd-cv17_operation-reference-manual_2938955074.webp)
Configuring Communication
64
CV17 17" Modero Coor Video Touch Panels
7.
Enter the
System
and
Device
number for the specific Master associated with your panel (
as seen in the
Online Tree tab
).
8.
Click
Add
and enter the IP Address of the Modero touch panel into the
Add URL
dialog box.
9.
Click
OK
to enter your IP Address and add it to the list.
10.
Click
Done
once you are finished adding your panel information to the list.
11.
Press the on-screen
Reboot
button to save any changes and restart the panel.
Master Connection section - NetLinx Master Ethernet IP Address - Auto Mode
In this mode, enter the System Number of the NetLinx Master. This mode instructs the Modero to search for a
Master that uses the same System Number (assigned within the Master Connection section) and
resides on the
same Subnet as itself.
1.
Toggle the
ICSNET/Ethernet
field until
Ethernet
is selected (
from the Master Connection section of the
System Connection page
).
2.
Press the
Mode
field until the choices cycle to the word
Auto
.
3.
Press the
System Number
field to launch a Keypad and enter the value for the system number of the
NetLinx Master.
This value can be obtained from the NetLinx Studio program > OnLine Tree of the
Workspace window.
4.
Do not alter the IP Settings section, of the System Connection page, as these fields are not applicable to
this connection mode.
5.
Enter a username and password (
into their respective fields
) if the target Master has been previously
secured.
6.
Press the on-screen
Reboot
button to both save any changes and restart the panel.
7.
Press the grey Front Setup Access button for
3 seconds
to open the Setup page and confirm there is an
active connection.
FIG. 60
URL List dialog
System Address
reflects the value
set in the Device
Addressing tab
Used to obtain an
existing URL
Used to set the
URL List
List from Master
on Master
The NetLinx Master and the Modero panel must both be on the same Subnet.
Summary of Contents for modero NXD-CV17
