AMX modero NXD-CV17, Operation/Reference Manual

Page: 80 / 168

Upgrading Modero Firmware
70 CV17 17" Modero Coor Video Touch Panels
4.
Click the Communications Settings button to open the Communications Settings dialog.
5.
Click on the NetLinx Master radio button ( from the Platform Selection section ) to indicate that you are
working with a NetLinx Master (such as the NXC-ME260 or NI-Series of Integrated Controllers).
6.
Click on the Authentication Required radio box (if the Master is secured) and then enter a username and
password.
7.
Click on the TCP/IP radio button ( from the Transport Connection Option section ) to indicate you are
connecting to the Master through an IP Address.
8.
Click the Edit Settings button ( on the Communications Settings dialog ) to open the TCP/IP Settings
dialog (FIG. 66).
9.
Enter the IP Address into the TCP/IP Address field. This information is obtained from either your System
Administrator or obtained from the Master.
10.
Click OK three times to close the open dialogs and save your settings.
11.
Click Yes to interrupt the current communication from the Master and apply the new settings.
12.
Select Tools > Reboot the Master Controller to access the Reboot the Master dialog, then click Reboot
to reboot the Master and incorporate any changes.
13.
Once the dialog replies with "Reboot of system complete" , press Done .
14.
Click the OnLine Tree tab in the Workspace window to view the devices on the System. The default
System value is one .
15.
Right-click on the Empty Device Tree/System entry and select Refresh System to re-populate the list.
FIG. 66 Assigning Communication Settings and TCP/IP Settings
List of previously saved
IP Addresses