Ampac SP Series, Installation, Commissioning & Operation

Page: 81 / 112

FireFinder
™
Installation Commissioning & Operation
Page 75
15 Main Functions
LEVEL II MAIN FUNCTIONS
0: DATE 1: TIME 2: DAYNIGHT SETTINGS 3: LOGS
4: TESTS 5: I/O 6: ACCESS
SELECT NO:
LEVEL III MAIN FUNCTIONS
0: DATE 1: TIME 2: DAYNIGHT SETTINGS 3: LOGS
4: TESTS 5: I/O 6: PASSWORDS
SELECT NO:
Figure 97: The Level II & III Functions Menu
15.1 Setting the Function Date Facility
Select
FUNCTION . A prompt will ask for a PASSWORD if the control panel is not currently active. Using
the keypad key in the Level 2 or 3 PASSWORD and press ENTER .
Press
m
to select the set DATE SCREEN . The prompt will ask for the date to be entered in this format,
DD/MM/YYYY ( EG 18/08/2005 ), key in and press ENTER . The screen will then return to the MAIN
FUNCTIONS MENU .
15.2 Setting the Function Time Facility
Press
n
then in the following format key in the time, HH:MM ( EG 16:00 ) using the 24 hour mode . Press
ENTER and the screen will return to the MAIN FUNCTIONS MENU .
15.3 Setting the Function Daynight Facility
Press
o
The DAY-NIGHT SETTINGS screen will appear. Time entry is the same as setting the “Time” facility
Press
m
to enter the DAY ON time then ENTER and,
n
to enter the NIGHT ON time then ENTER .
o
to ENABLE / DISABLE then ENTER .
For this Function to have control it must be ENABLED , press
o
Re-pressing
o
will
toggle to DISABLE .
15.4 Function Logs Facility
Press
p
and the EVENT LOG MENU will be displayed.
The
LOGS MENU allows the operator to select and view the events that have occurred of all;
Press:
m
ALARM,
n
FAULT ,
o
ISOLATE ,
p
SYSTEM
EVENT LOG MENU ( MAXIMUM SIZE = 1162 )
0: ALARM 1: FAULT 2: ISOLATE 3: SYSTEM
4: I/O
SELECT NO:
FAULT LOG 7/7 11/7/2005 14:56 05
SUPPLY FAULT
ST: EARTH FAULT
SELECT 0: PRINT ENTRY 1: SHOW OPTIONS
Figure 98: Logs Function Menu & Fault Log Selected
Once the type of log is selected, eg. FAULT above, each entry can be viewed by stepping through them
using the
NEXT
and
PREVIOUS
keys