Ametek IPS-4-UV, User Manual

Page: 143 / 200

Service & Parts
|
6-5
Spare Analyzer Fuses
Choose the appropriate fuses (120 or 240 VAC) for the application.
Choose the appropriate fuses (120 or 240 VAC) for the application.
These main analyzer fuses do not need to be changed out at regular
intervals, but AMETEK recommends these fuses are available in the
event that a replacement fuse is required.
Fuses, IPS-4 Analyzer – Recommended Parts to Have On-Site
120 V Analyzers 240 V Analyzers
Description (Location) Part No. Fuse Type Part No. Fuse Type
Main AC Power (F1) 301-0863 6.3 A 301-0863 6.3 A
DC Power (F2) 301-0861 2.0 A 301-0861 2.0 A
Oven Heater (F3) 301-0862 4.0 A 301-0861 2.0 A
Bench Heater (F4) 301-0860 1.0 A 301-0859 0.5 A
These fuses are located on the AC Terminal in the Electronics Enclosure.
Spare Battery, MCU Board
* MCU battery life expectancy is approximately five years; therefore,
only a 5-year quantity is included in this list.
It is important to order a replacement battery when your analyzer is
approaching five years from the original manufacture date. However,
it is possible that the battery can become damaged by a power spike,
resulting in the need for a replacement.
Battery, IPS-4 Analyzer – Recommended Part to Have On-Site
Part No. Description 5-Year Qty
301-0382 Cell Lithium Coin Ext. Temp 1*
(MCU Board) (see Note, above)

NOTE

NOTE