Ametek IPS-4-UV, User Manual

Page: 133 / 200

Maintenance & Troubleshooting | 5-27
Viewing Current Alarm Messages
All active alarms are displayed on the Current Alarms screen. Each line
will occupy one alarm description. Up to six active alarms can be dis-
played on the screen at once. If more than six alarms are active, use the
UP
/
DOWN
arrow keys to scroll through the list. The alarm at the top of the
list is most recent alarm; the alarm at the bottom is the oldest.
To view active alarms:
1. Press the
ALARMS
soft key to view the ALARMS screen.
2. Select Current Alarms and press
ENTER
.
If there are active alarms, the alarm descriptions is displayed. No time
or date is displayed with active alarms.
If there are no active alarms, “ No alarms ” is displayed.
To back out of this menu, press
CANCEL
.
Viewing Historical Alarm Messages
Alarms that have been reset (no longer active) are stored in the Alarm
Log , accessed from the ALARMS screen. Logged (or historical) alarms
– which occupy two lines – include the time and date each alarm was
set and reset. The logged alarm at the top of the list is most recently re-
set alarm; the alarm at the bottom is the oldest. The Alarm Log will be
cleared when the analyzer is powered down.
To view a history of alarms that have been reset:
1. Press the
ALARMS
soft key to view the ALARMS screen.
2. Select Alarm Log and press
ENTER
.
If there is a history of reset alarms, the alarm descriptions are dis-
played.
If there is no history of alarms, “ Log empty ” is displayed.
Use the
UP
/
DOWN
arrow keys to scroll through the list (if there are
more than three logged alarms).
To back out of this menu, press
CANCEL
.