Ametek IPS-4-UV, User Manual

Page: 105 / 200

Controller / User Interface | 4-39
English , select Language , press
ENTER
, then use the
UP
/
DOWN
arrow
keys to scroll through the list until you locate the language of choice.
Press
ENTER
again to select the language.
Available languages for viewing the software include:
- English - German
- Russian - French
- Spanish
Menu Home Time
This displays and allows you to change the time an inactive menu will
display before it returns to the home screen.
User Time-Out
This displays and allows you to change the inactivity period a user is
logged into to the system.
Screen Brightness
This displays and allows you to change the screen brightness.
Modbus Screen
The Modbus screen (Figure 4-39) allows the user to view and/or set up
Modbus parameters to enable the analyzer to communicate with the Mod-
bus master.
Figure 4-39.
Modbus screen.
 Baud 9600
Parity even
Stop bits 0
Modbus Address 1
Modbus Timeout

3000 msec

Modbus Port Off
HOME ALARMS STATUS SETUP
Baud
This displays and allows you to change the current Baud Rate at
which data will be transferred using Modbus communications. The
typical default is 9600 . Other options include 115200 , 57600 , 38400 ,
19200 .
Parity
This displays and allows you to change the current Parity setting used
for Modbus communications. The typical default is even . Other op-
tions include odd or none .
Stop Bits
This displays and allows you to change the current Stop Bits setting
used for Modbus communications. The typical default is 0 . It can also
be set to 2 .