Ametek IPS-4-UV, User Manual

Page: 23 / 200

Overview | 1-7
Four independent analog output signal channels
The full-scale concentration for each output are configurable as either
0–20 mA or 4–20 mA.
Sample control system that can control and monitor the state of up to five tem-
perature-control zones within the sample system
Temperature-control zones include the Oven/Sample System Enclo-
sure and Optical Bench. Three other zones are currently spare. Sample
and Vent Lines can be monitored only.
The temperature-control zones are protected by independent over-
temperature circuits. If any of these zones are found to be out of
range, the analyzer automatically forces its sample system into
Not Ready mode to avoid contamination of the system.
User Interface Panel
Provides access to a readout of system parameters, alarm set points,
local diagnostics, and user input. The calibration and configuration
functions can be protected by a password.
Up to eight status relays
Indicate faults, non-critical conditions, and operational status of the
analyzer.
Reliable electronics control system
Controls the overall operation of the analyzer.
Ethernet Communication
Allows for remote communication with the analyzer for early-detec-
tion diagnostics (troubleshooting) to determine imminent failure of
parts (e.g., lamp failure, due to diminishing voltage levels).
Gas and Liquid applications
Sample systems designed to accommodate gas and liquid applications.