Amazone UF 1002, Operating Manual, Page: 196 / 232

Cleaning, maintenance and repairs
196 UF02 BAG00225.3 09.22
14.7 Adjusting the hydraulic throttle valve
The operating speeds of the individual hydraulic functions are set in
the factory.
However, depending on the type of tractor, it may be necessary to
correct these speed settings.
The operating speed for a hydraulic function can be adjusted by
screwing the hexagon socket head screw on the corresponding throt-
tle in or out.

Reduce operating speed = screw in hexagon socket head screw.

Increase operating speed = screw out hexagon socket head
screw.
Always adjust the two throttles in a throttle pair equally when correct-
ing the operating speed of a hydraulic function.
14.7.1 Q-plus boom
(1) Hydraulic throttle valve - fold out the boom.
(2) Hydraulic throttle valve - lock and unlock the
swing compensation.
(3) Hydraulic throttle valve - fold in the left-hand
boom.
(4) Hydraulic throttle valve - fold in the right-
hand boom.
(5) Hydraulic joint - height adjustment (the
throttle is on the left-hand hydraulic cylinder
for the height adjustment).
When correcting the operating speed
at which the boom folds in and out, al-
ways adjust all three hydraulic throttle
valves (1 and 3) equally.