Amazone UF 1002, Operating Manual, Page: 167 / 232

Using the machine
UF02 BAG00225.3 09.22 167
11.8.1 Spraying out the diluted residual quantity at the end of spraying operations
1. Switch off sprayers on the control terminal.
2. Run the pump.
3. Dilute the residual quantity with 10 times the amount of flushing
water.
4. Switch of the agitators.
5. Switch on sprayers on the control terminal.

If possible, first spray out the undiluted spray liquid from the
spray line on an untreated remaining area.

Spray out the diluted residual quantity on the treated area.

Keep flushing the diluted residues until air escapes from the
nozzles.
6. Switch off sprayers on the control terminal.
7. Cleaning the field sprayer.
When spreading residue, observe the maximum permissible applica-
tion quantity of the agent on areas already treated.
11.8.2 Emptying the spray liquid tank using the pump
1. Couple a suitable emptying hose from the
external tank to the implement-side empty-
ing connection.
2. Check the posi-
tion of the suction valve chest SA .
3. Pressure valve chest DA in position .
4. Run the pump.

Emptying procedure starts.
5. After emptying, pressure valve chest DA in
position .
6. Interrupt the pump drive.
7. Uncouple the hose.
The hose is still filled with spray liquid.
FlowControl: Before emptying, pump the contents of the front tank
into the spray liquid tank.

When the spray liquid tank of the sprayer is empty, the front tank
can no longer be emptied.