Amazone UF 1002, Operating Manual, Page: 16 / 232

General safety instructions
16 UF02 BAG00225.3 09.22
2.7 Safety measures in normal operation
Only operate the machine if all the safety and protection equipment is
fully functional.
Check the machine at least once a day for visible damage and check
the function of the safety and protection equipment.
2.8 Danger from residual energy
Note that there may be residual mechanical, hydraulic, pneumatic and
electrical/electronic energy on the machine.
Use appropriate measures to inform the operating personnel. You can
find detailed information in the relevant sections of this operating
manual.
2.9 Maintenance and repair work, fault elimination
Carry out prescribed setting, maintenance and inspection work in
good time.
Secure all media such as compressed air and the hydraulic system
against unintentional start-up.
Carefully fix and secure larger assemblies to lifting gear when carry-
ing out replacement work.
Regularly check that bolted connections are firmly secured and
tighten if necessary.
When the maintenance work is completed, check the function of the
safety devices
2.10 Design changes
You may make no changes, expansions or modifications to the ma-
chine without the authorisation of AMAZONEN-WERKE. This also ap-
plies when welding support parts.
Any expansion or modification work shall require the written approval
of AMAZONEN-WERKE. Only use modification and accessory parts
approved by AMAZONEN-WERKE so that the type approval, for ex-
ample, remains valid in accordance with national and international
regulations.
Vehicles with an official type approval or with equipment connected to
a vehicle with a valid type approval or approval for road transport ac-
cording to the German road traffic regulations must be in the state
specified by the approval.
WARNING
Risk of crushing, cutting, catching, being drawn in or impact
from the failure of support parts.
It is strictly forbidden to

drill holes in the frame or on the running gear.

increase the size of existing holes on the frame or the running gear.

weld support parts.