Amazone UF 1002, Operating Manual, Page: 152 / 232

Using the machine
152 UF02 BAG00225.3 09.22
11.3.3 Filling the spray liquid tank through the pressure connection
CAUTION

Maximum permitted water pressure: 8 bar

At a filling capacity greater than 500 l/min, keep the lid of the
spray liquid tank open during the filling procedure.
Otherwise, the spray liquid tank can be damaged.
1. Determine the precise water filling quan-
tity (see section "Calculating the filling or re-
fill quantity", Seite 146).
2. Couple the pressure hose with the pressure
connection and the hydrant.
3. Switch tap FD in position
4. TwinTerminal:
4.1 Select pressure filling .
4.2 Enter the target fill level and confirm.

Filling of the spray liquid tank stops auto-
matically as soon as the nominal fill level
has been reached.
5. Flushing in the agents while filling, see
page 154.
6. Interrupt the filling process if flushing is not
possible before the nominal fill level is
reached.

Switch tap FD in position
0
.
7. When the nominal fill level is reached:

Close the supply-side stop tap.

TwinTerminal: Relieve the pressure
hose

Switch tap FD in position
0
.

Uncouple the hose from the filling con-
nection.
The hose is still filled with water.