Amada MF-C300A-SF, Original Instructions Manual, Page: 57 / 199

1 . Setting Welding Schedules
57
MF-C300A-SF/C500A-SF
Chapter 2 V
arious Settings
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
Items and Buttons Common to Each Screen
The display items, setting buttons, and screen selecting buttons provided on the
following screens are common to the 4 types of basic screen.
How to See the Display Items and How to Use the Setting Buttons
: Settable item
SCHEDULE
Sets the SCHEDULE No. of laser light. Output conditions can be registered by
setting the 256 numbers of #0 to #255 or set schedule can be called.
When the button is pressed, a numeric keypad is displayed. Press an optional
schedule number and then the ENT key. You can also carry out the setting by
pressing "<" and ">" buttons on right and left sides.
The set schedule number is displayed on the button.
FORM Sets the waveform creating method.
When this button is pressed, a window to select "FIX" (fixed waveform), "FLEX"
(flexible waveform of pulse oscillation) or "CW" (flexible waveform of CW (contin -
uous) oscillation) is displayed. Select a creating method by pressing an optional
button. The set method (FIX, FLEX or CW) is displayed at the button.
LD
Sets the LD to ON/OFF.
When this button is pressed, a window to select ON/OFF is displayed.
At ON, the LD comes on.
At OFF, the LD does not come on and no laser light is output.
The set value (ON or OFF) is displayed at the button.
BEAM Always turned ON since the BEAM1 is always selected.
GUIDE Sets the guide light output to ON/OFF.
When the button is pressed, a window to select ON/OFF is displayed.
At ON, guide light is output. At OFF, no guide light is output.
The selected result (ON or OFF) is displayed at the button.
Screen selecting
buttons
Display items and
setting buttons
Display items and
setting buttons