Amada MF-C300A-SF, Original Instructions Manual, Page: 138 / 199

138
MF-C300A-SF/C500A-SF
3 . Initial Settings
2
Specifying Communication Schedules
(1) Set communication schedules in "RS-485 COMMUNICATION SETUP." Press
the setting button to be changed for this setting.
3
Specifying Equipment No .
(1) Press the "NETWORK #" setting button.
Enter the laser equipment No. in the range of 0 to 15 by using the numeric key-
pad and then press the ENT key.
⇒ For controlling multiple lasers by single personal computer, it is necessary to reg-
ister equipment No. (NETWORK #) for each equipment. Set equipment No. with-
out duplication. If duplication of equipment No. exists, a data collision will occur
on the communication line and the laser cannot be correctly operated.
(2) Press the "X" button.
Returns to the CONFIG screen.