Amada MF-C300A-SF, Original Instructions Manual, Page: 43 / 199

1 . Connecting the Power Supply
43
MF-C300A-SF/C500A-SF
Chapter 2 Connections and Preparations of Each Section
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
Chapter 2
●
Connections and Preparations of
Each Section
1 . Connecting the Power Supply
CAUTION
Your qualified electrician must carry out the electrical connection to main power
supply . (Also follow your local accident prevention regulations, such as the German
Regulation, BGVA2 .)
CAUTION
■ For the power supply side, we earnestly recommend using a leakage breaker with
the rated current of 20 A or more, which is applicable to harmonics and surges .
■ Confirm that the Laser is grounded.
Item required
Slotted screwdriver and Phillips screwdriver
Operating Procedure
(1) Open the terminal cover on the power supply terminals on the rear.
(2) Loosen the cable gland on the terminal cover to pass the power harness.
(3) While confirming the terminal colors of the power harness, connect the power
harness to the L (black), N (black), and PE (green/yellow) power input terminals,
and secure it with screws with the tightening torque of 1.5 to 1.8 N-m.
Installation and
Preparation Part
Power input terminals
BK GN/YL
5 .5 sq
(AWG10)
BK