Amada MF-C300A-SF, Original Instructions Manual, Page: 35 / 199

3 . Name and Function of Each Section on the Lateral Side and Rear Side
35
MF-C300A-SF/C500A-SF
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
Chapter 2 Name and Functions of Each Section
(11) THMON Con-
nector
Not used.
(12) PWRMON Con-
nector
BNC connector used to output an analog signal representing the monitor
waveform of laser power. When viewing the waveform of laser output,
connect to an oscilloscope.
The output range is 0 to 5 V (MF-C300A-SF: 300 W = 4 V, MF-C500A-
SF: 500 W = 4 V). Set the impedance of the oscilloscope to 1 MΩ.
(13) CH .I/L Connec-
tor
Not used.
(14) TH Connector Not used.
(15) R .MNT Connec-
tor
Not used.
(16) E-STOP Con-
nector
Used to connect to the Remote Interlock for emergency stop or input/
output Emergency signals.
(17) RS-485 (1), (2)
Connectors
Connects a personal computer to use the external communication function.