CLEANING AND MAINTENANCE
XL5000
M02001102EN0319
49
Miscellaneous
Maintenance
interval
Maintenance
group
Task
With replacement of
the ribbon / daily
Mechanical
Visual inspection of the backing pad material for signs of wear, damage
and soiling; clean if necessary, replace if necessary.
The manufacturer recommends only replacing components of the printing system if in the course of an inspection func-
tional problems or damage appear.
7.2.2
Replacing a thermal printhead
WARNING
Personal injury!
▪
Power off printer and disconnect from electrical and air supply.
ATTENTION
Electrical damage to the thermal printhead when handled incorrectly
Thermal printheads are electrostatically sensitive electronic components. Incorrect handling can damage
or destroy the thermal printhead due to ESD voltage flashovers. Any liability and warranty for any dam-
ages caused by incorrect handling of the printing system is excluded by Allen Coding GmbH.
▪
Take the appropriate ESD precautions (e.g. wear an ESD bracelet) before you begin with the replace-
ment of the thermal printhead.
▪
Observe the corresponding information in the operating instructions.
Summary of Contents for XL5000 OPPOSITE
