CLEANING AND MAINTENANCE
XL5000
M02001102EN0319
45
7
Cleaning and maintenance
CAUTION
Hazards during cleaning and maintenance activities!
Switch off the device during cleaning and maintenance work. Otherwise, personnel safety may be at risk
and damage to the device or other nearby property may result.
▪
Always deactivate the power supply to the device during cleaning and maintenance activities. Pull
the mains plug.
▪
During activities and during your absence, secure the device so that no changes may be performed
by other persons or situations.
▪
Maintenance and cleaning work may only be performed by trained personnel.
ATTENTION
Use of ribbons with lower quality
The use of ribbons with lower quality can considerably increase the necessary cleaning work and the
wearout of the thermal printhead.
▪
Only use ribbons specified by the manufacturer.
NOTE
Regular inspection and cleaning of the thermal printhead
Regular inspection and cleaning is necessary to maintain the service life, efficiency and performance of
the thermal printhead. Optimal printing results can only be achieved with a clean, undamaged thermal
printhead.
The XL5000 printing system is designed for use in industrial applications and requires minimal service as a result.
However, heavily stressed wear parts (e.g. thermal printhead) must be inspected regularly for dirt or damage according
to your use and cleaned or replaced as necessary.
Summary of Contents for XL5000 OPPOSITE
