ERROR DETECTION AND MANAGEMENT
42
XL5000
M02001102EN0319
6
Error detection and management
Printer errors are usually identified by the error messages displayed on the control terminal. You can use the test label
to check the print quality.
NOTE
Error messages
Please refer to the control terminal User´s Guide for a comprehensive description of all error messages.
6.1
Print quality
CORRECT PRINTOUT
PRINTOUT WITH BLURRY VERTICAL BANDS
The printhead needs cleaning or has suffered damage by
overheating or misuse. Clean the printhead or replace it
as necessary.
PRINTOUT WITH WHITE SPOTS
Shows that the print platen has surface defects such as
cuts, cracks or nicks. Clean or replace print platen.
IMAGE WITH VERTICAL WHITE LINES
The printhead is coated with debris or damaged. Clean or
replace as necessary.
IMAGE GRADUALLY FADES
Indicates that the printhead is improperly supported or
print platen out of alignment.
IMAGE INCOMPLETE
Indicates that the length of the programmed label is too
short. Change label length using the respective software.
Conversely, if the top of the line of the label is missing or
has poor printing quality, increase the electro valve tim-
ing to allow for good contact between the printhead and
substrate at the beginning of the print cycle.
Summary of Contents for XL5000 OPPOSITE
