allen XL5000 OPPOSITE Operating Instructions Manual Download Page 17

Page: 17 / 80

PRODUCT SPECIFICATIONS

XL5000
M02001102EN0319

2.3

Description of device

WARNING

Personal injury!

▪

Read and follow safety rules and guidelines in chapter 3 before attempting to setup or operate this
equipment

The new

XL5000

printers incorporate state-of-the-art technology. They are designed to print bar codes, alphanumeric

texts, dates, times, logos, and other images directly onto the surface of packaging materials such as plastics, laminates,
cellophane, cardboard, self-adhesives, etc.

To satisfy speed, flexibility and ease of handling requirements, the

XL5000

exhibits the following salient characteristics:

▪

Compact size - electronics located inside body of printer

▪

Easy conversion to continuous mode

▪

Full Unicode capability

▪

Downloadable fonts (user option)

▪

Ethernet port

▪

Optional alarm beacon connectivity

▪

Maximum integration and adaptability to most machines

▪

Minimum mechanical maintenance

▪

Ease of configuration and ease of use

▪

Simple connection to computer systems

▪

Optimized use of thermal transfer ribbon

▪

High-quality printing

Summary of Contents for XL5000 OPPOSITE

















































































Search results

Summary of Contents for XL5000 OPPOSITE

Reviews:

Related manuals for XL5000 OPPOSITE

Brands by name

Popular brands

allen XL5000 OPPOSITE, Operating Instructions Manual

Search results

Summary of Contents for XL5000 OPPOSITE

Reviews:

Related manuals for XL5000 OPPOSITE

Brands by name

Popular brands