allen XL5000 OPPOSITE, Operating Instructions Manual

Page: 10 / 80

PRODUCT IDENTIFICATION
10
XL5000
M02001102EN0319
1.2.3 Qualification of personnel
Operation and set-up:
Operation and set-up of the device may only be performed by sufficiently qualified and trained personnel that have
been authorized by operator to perform these tasks.
Installation, cleaning and maintenance:
Installation, cleaning and maintenance of the device may only be performed by fully qualified and trained technical per-
sonnel.
Maintenance:
Maintenance of the device may only b e performed by the manufacturer’ s technical personnel or by fully trained and
qualified technical personnel.
1.3 Technical data
This section contains information on the mechanical and electrical properties of the printing system and its accessories.
1.3.1 Mechanical data
NOTE
Additional space required for incoming and outgoing cables and for changing the ribbon
Please observe during installation that additional space on the equipment parts is required for incoming
and outgoing cables as well as for changing the ribbon during operation.
Printing system dimensions
Equipment height
[mm] 178
Equipment width [mm] 212
Equipment depth [mm] 244
Printing system weight
Printing system weight [kg] / [pounds] 8 / 17.6
Cable lengths
Power supply connection cable [m] 2
Ethernet cable [m] max. 30
I/O connection cable [m] max. 30
RS-232 connection cable [m] max. 30
Alarm beacon connection cable [m] max. 3