allen XL5000 OPPOSITE, Operating Instructions Manual

Page: 47 / 80

CLEANING AND MAINTENANCE
XL5000
M02001102EN0319
47
Overview of cleaning tasks
Cleaning interval Recommended cleaning
agent Task
With each replacement of the
ribbon, or before and after an
8-hour shift at the latest.
Note :
Additional cleaning may be
necessary if there is a ribbon
tear.
Technical cleaning towels
Art no.: 1.0000.45008 Cleaning of the thermal printhead.
Clean the thermal printhead until no wax / resin
residue can be seen on the cleaning towel.
Depending on the degree of
soiling
(Recommendation: with re-
placement of the ribbon) Rubber roller cleaner
Art no.: 1.0000.45007 Cleaning of the drive roller
Depending on the degree of
soiling
(Recommendation: with re-
placement of the ribbon) Damp cloth; metal parts: Eth-
anol Cleaning of peel bar rollers
Depending on the degree of
soiling Cleaning of the backing pad material
Depending on the degree of
soiling Damp cloth; metal parts: Eth-
anol Surface cleaning of the printing system