Rockwell Automation Publication 750-UM006C-EN-P - March 2022
9
Preface
PowerFlex 755 Drive Embedded EtherNet/IP
Adapter User Manual, publication
This manual provides information about the EtherNet/IP
adapter that is embedded on the main control board in
PowerFlex® 755 drives, and how to use it for network
communication.
PowerFlex 750-Series Configuration with
Permanent Magnet Motors Application,
publication
This document contains methodologies for the proper test
and setup of PM motors with the PowerFlex 755 drive, using
PM flux vector (FV) mode, and the PowerFlex 750-Series
drives using iPM FV mode.
PowerFlex 750-Series AC Drives Installation
Instructions, publication
This document explains the basic steps for mechanical
installation and for connecting incoming power, the motor,
and basic I/O to the PowerFlex 750-Series Adjustable
Frequency AC drive.
PowerFlex 755 On-Machine Drive Packing
Instructions, publication
This document contains a high level view of the installation
and unpacking instructions for the PowerFlex 755 On-
Machine Drive.
PowerFlex 750-Series Drive Programming Manual,
publication
Provides detailed information on:
• I/O, control, and feedback options
• Parameters and programming
• Faults, alarms, and troubleshooting
PowerFlex 750-Series AC Drives Quick Start,
publication
This Quick Start publication is designed to guide you through
the 6 BASIC STEPS that are required to startup your PowerFlex
750-Series AC drive for the first time for simple applications.
PowerFlex 750-Series AC Drives Technical Data,
publication
Provides detailed information on:
• Drive specifications
• Option specifications
• Fuse and circuit breaker ratings
PowerFlex 755/755T Integrated Safety - Safe
Torque Off Option Module (S3),
publication
These publications provide detailed information on how to
install, configure, and operate the 750-Series safety option
modules.
PowerFlex 755/755T Integrated Safety Functions
Option Module (S4), publication
EtherNet/IP Network Configuration User Manual,
publication
This manual describes how to use EtherNet/IP
communication modules in Logix 5000 control systems.
Integrated Motion on the EtherNet/IP Network:
Configuration and Startup,
publication
Configure an integrated motion on the EtherNet/IP network
application and startup your motion solution with a Logix
controller-based system.
Motion System Tuning Application Techniques,
publication
The purpose of this publication is to assist you in tuning a
Kinetix drive system. This document is intended for motion
control users with novice to advanced skill levels that are
familiar with the following:
• Kinetix servo drives
• Servos or EtherNet/IP communication
• Use of the Logix Designer application to create a motion
axis
• Understanding how control loops work in motion control
applications
Each component of the control structure is described in detail
and out-of-box tuning, autotuning, and manual tuning
techniques are presented.
Resource
Description
