Rockwell Automation Publication 750-UM006C-EN-P - March 2022
35
Chapter
3
Install the Drive
Mount the Drive
All connections needed to set up the drive, including the EtherNet/IP network
connection, are made without removing the front cover. The cover does not
need to be removed to bring a drive into service.
For more information on requirements, see the warning and attention
statements under
Prepare for Installation on page 17
.
ATTENTION:
The following information is merely a guide for proper
installation. Rockwell Automation cannot assume responsibility for the
compliance or the noncompliance to any code, national, local, or otherwise
for the proper installation of this drive or associated equipment. A hazard of
personal injury and/or equipment damage exists if codes are ignored during
installation.
Mounting Holes
Mounting Holes
527.0
(20.75)
See Detail A
673.1
(26.50)
ø12.00
(0.47)
15.00
(0.59)
ø 24.00
(0.94)
Detail A 2X
ø 5.28
(0.207) 2X
Dimensions are in millimeters and (inches).
IMPORTANT
Mounting environments vary. Verify that the fastening hardware type and
torque values are rated for the weight of the enclosure and are suitable for
the mounting environment.
