128
Rockwell Automation Publication 750-UM006C-EN-P - March 2022
Chapter 4
Configure and Start Up the Drive
2. Choose the General page.
For the PowerFlex 755 On-Machine Drive, Rockwell Automation
recommends that you select Constant Speed for either an induction or a
servo motor.
Choose an Axis Configuration type. The available configurations are:
Position Loop (P), Velocity Loop (V), Torque Loop (T), and Frequency
Control (F).
for more information related to
position loop setup.
3. Choose a Feedback Configuration type, the table compares feedback
type and loop type.
4. Choose and Application Type, if applicable.
Feedback Type
Axis Type
Supported
Motor Feedback
Position Loop (P), Velocity Loop (V), Torque Loop (T)
Yes
Motor Feedback
Position Loop (P), Velocity Loop (V)
No
Load Feedback
Position Loop (P), Velocity Loop (V), Torque Loop (T)
No
Dual Feedback
Position Loop (P)
Yes
Dual Integrator
Position Loop (P)
Yes
Master Feedback
Feedback Only (N)
No
No Feedback
Frequency Control (F)
Yes
No Feedback
Velocity Loop (V)
Yes
