152
Rockwell Automation Publication 750-UM006C-EN-P - March 2022
Chapter 5
Drive Maintenance
Replace the Brake Contactor
(5BC130)
1. Follow the procedure to
Remove the Front Cover on page 148
.
3. Use a
flathead screwdriver
to disconnect the wire from the input and
output sides of the brake contactor
4. Use
flathead screwdriver
to loosen the 2 screws from the end anchors
that secure the brake contactor to the enclosure.
5. Use
a screwdriver
to dislodge the brake contactor from the DIN rail.
6. Remove the brake contactor from the cabinet.
Location
Wire Description
Terminal Number
Top
5BC130-L1
L1
5BC130-L2
L2
5BC130-13
13
5BC130-A1
A1
5BC130-A2
A2
5BC130-21
(1)
(1) Only applicable to Safety option 'C'
21
Bottom
5BC130-T1 (From Connector)
T1
5BC130-T1 (From Surge Suppressor)
T1
5BC130-T2 (From Connector)
T2
5BC130-T2 (From Surge Suppressor)
T2
5BC130-14
14
5BC130-22
ATTENTION:
Use caution when removing the service contactor from DIN rail.
Failure to use caution could result in personal injury or equipment damage.
Contactor
Cat. No.100-C09EJ10
4 (x2)
5
6
