ALDI ABP1815MA Instruction Manual Download Page 165

Page: 165 / 168

AFTER SALES SUPPORT

1300 889 028 (toll free)

e-mail:

[email protected]

ACG118PA • 2323 • 05/2019

MODEL No.:

ACG118PA • 2323 • 05/2019

NOTE:

To achieve longer USB charger life, don’t plug in mobile

phones or other devices that exceed charging current on the battery

charger’s label. To charge, insert the USB plug into one of the

charging ports (3).

7.3. Charging Turn On Button (1)

Your charger is equipped with a charging turn on button (1).

First install the USB charger onto a battery pack, then connect your

USB charging cable end into one of the charging ports (3). Press the

charging turn on button (1) to start charging. The battery power

indicator (5) will illuminate for three seconds to show the battery

power. During charging, press the charging turn on button (1) to

check the battery power remaining.

8. Maintenance

There are no serviceable parts inside your battery charger.

Any adjustment, servicing or maintenance should be performed by

an authorized repair agent, so do not attempt to repair your battery

charger.

The USB Charger requires no additional lubrication or maintenance.

Never use water or chemical cleaners to clean your USB Charger.

Wipe clean with a dry cloth. Always store your USB Charger in a dry

place.

9. Warranty

Your new WORKZONE

TITANIUM 20V Li-Ion USB Charger will more

than satisfy your expectations.

It has been manufactured under stringent WORKZONE

TITANIUM

Quality Standards to meet superior performance criteria.

You will find your new 20V Li-Ion USB Charger easy and safe to

operate, and, with proper care, it will give you many years of

dependable service.

CAUTION. Carefully read through this entire instruction manual

Summary of Contents for ABP1815MA









































































































































































Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands

ALDI ABP1815MA, Instruction Manual

Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands