ALDI ABP1815MA Instruction Manual Download Page 7

Page: 7 / 168

AFTER SALES SUPPORT

1300 889 028 (toll free)

e-mail:

MODEL No.:

[email protected]

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

1. Application

Xfinity Plus 20V Li-ion Battery and Battery Charger–

JLH122200370S&Z10&ABP1815MA

2. Package Content List

First time users or inexperienced operators pay particular attention to the

operation of the Xfinity Plus 20V Li-ion Battery and Battery Charger , including

details of starting and stopping and correct use of the Xfinity Plus 20V Li-ion

Battery and Battery Charger on pages 11-13, as well as the maintenance

instructions on pages 13.

NOTE:

This product is for private domestic DIY use only. It is not suitable for

commercial or trade use.

This Xfinity Plus 20V Li-ion Battery and Battery Charger

is used for charging

and supplying power to the products enclosed in this 20V Cordless Kit.

The batteries and charger are to be used only for its prescribed purpose. Any

other use is deemed to be a case of misuse.

2 x 20V Li-Ion Batteries

1 x Battery Charger Adaptor

1 x Plug Pack Charger

1 x Instruction Manual

1 x Warranty Card & Certificate

• Remove all packing

materials

• Ensure all parts on the

contents list are present

• Check the appliance,

and all accessories for

transportation damages

WARNING!

Please read and understand this instruction manual

before use and keep it for your future reference. Your power tool

should only be passed on together with this instruction manual.

WARNING!

To reduce risk of injury, only use the supplied battery and

charger or any ALDI Xfinity Plus 20V Li-ion Battery or Battery Charger.

Other type of battery packs may burst causing personal injury and

damage. The battery pack must be recharged only with the supplied

battery charger adaptor and plug pack charger or any ALDI Xfinity

Plus 20V Battery or Battery Charger.

Summary of Contents for ABP1815MA









































































































































































Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands

ALDI ABP1815MA, Instruction Manual

Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands