ALDI ABP1815MA Instruction Manual Download Page 160

Page: 160 / 168

AFTER SALES SUPPORT

1300 889 028 (toll free)

MODEL No.:

ACG118PA • 2323 • 05/2019

e-mail:

[email protected]

1. Application

20V Li-Ion USB Charger

2. Package Content List

First time users or inexperienced operators pay particular attention to the

operation of the 20V Li-Ion USB Charger, including details of starting and

stopping and correct use of the 20V Li-Ion USB Charger on page 8, as well as

the maintenance instructions on page 9.

Intended use of 20V Li-Ion USB Charger

NOTE:

This product is for private domestic DIY use only. It is not suitable for

commercial or trade use.

This 20V Li-Ion USB Charger is

used for charging or supplying power to

mobile phones (Android and iPhone) or any USB device that meets the

technical parameter of 5V Output.

1 x 20V Li-Ion USB Charger

1 x Instruction manual

1 x Warranty Card & Certificate

• Remove all packing

materials

• Ensure all parts on the

contents list are present

• Check the appliance,

and all accessories for

transportation damages

WARNING!

Please read and understand this instruction manual before

use and keep it for your future reference. Your 20V Li-Ion USB Charger

should only be passed on together with this instruction manual.

WARNING!

To reduce risk of injury, only use the supplied battery

and charger in this kit or any ALDI Xfinity Plus range of 20V battery

packs. Other type of battery packs may burst causing personal injury

and damage. The battery pack must be charged using ALDI Xfinity

Plus 20V battery chargers.

Summary of Contents for ABP1815MA









































































































































































Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands

ALDI ABP1815MA, Instruction Manual

Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands