ALDI ABP1815MA Instruction Manual Download Page 76

Page: 76 / 168

AFTER SALES SUPPORT

1300 889 028 (toll free)

e-mail:

[email protected]

CSC165XA.9 • 2323 • 05/2019

MODEL No.:

CSC165XA.9 • 2323 • 05/2019

1. Application

20V Li-Ion 165mm Cordless Circular Saw

2. Package Content List

First time users or inexperienced operators pay particular attention to

the operation of the 20V Li-Ion 165mm Circular Saw, including details of

starting and stopping and correct use of the 20V Li-Ion 165mm Circular Saw

on pages 18-22, as well as the maintenance instructions on page 23.

Intended use of 20V Li-Ion 165mm Circular Saw

NOTE:

This product is for private domestic DIY use only. It is not suitable for

commercial or trade use.

The 20V Li-Ion 165mm Circular Saw is intended for light use around the

home and domestic applications. It is particularly useful for trimming

plywood and similar sheet material. It is NOT suitable for metal cutting

blades or discs.

1 x 20V Li-Ion 165mm Circular Saw

1 x 5mm Hex key

1 x Saw blade

1 x Parallel guide

1 x Dust Extraction adapter

1 x Instruction manual

1 x Warranty Card & Certificate

• Remove all packing materials

• Ensure all parts on the contents

list are present

• Check the appliance, and all

accessories for transportation

damages

WARNING!

Please read and understand this instruction manual

before use and keep it for your future reference. Your product

should only be passed on together with this instruction manual.

WARNING!

To reduce risk of injury, only use the ALDI Xfinity Plus

range of 20V Li-Ion battery packs. Other type of battery packs may

burst causing personal injury and damage. The battery pack must be

charged using with ALDI Xfinity Plus 20V Li-Ion battery chargers.

Summary of Contents for ABP1815MA









































































































































































Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands

ALDI ABP1815MA, Instruction Manual

Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands