ALDI ABP1815MA Instruction Manual Download Page 147

Page: 147 / 168

AFTER SALES SUPPORT

1300 889 028 (toll free)

MODEL No.:

TRD18SA.9 • 2323 • 05/2019

e-mail:

[email protected]

5. General safety warning

SAFETY WARNING

SAVE THESE INSTRUCTIONS!

READ ALL INSTRUCTIONS!
Safety instructions

WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS.

Failure to follow all instructions listed below may result in

electric shock, fire and / or serious personal injury.

1) Do not use this apparatus near water.

2) Clean only with dry cloth.

3) Ventilation should not be impeded by covering any open vents

on the product.

4) Do not use near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

5) Only use attachments/accessories specified by the manufacturer.

6) Remove the battery during lightning storms or when unused for

long periods of time.

7) Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

8) The apparatus shall not be exposed to dripping or, splashing and

that no objects filled with liquids, such as vases, shall be placed

on the apparatus.

9) The batteries shall not be exposed to excessive heat such as

sunshine, fire or the like.

CAUTION:

Danger of explosion if a non specified battery is used on

this product. Use only the supplied 20V Li-Ion battery or any ALDI

Xfinity Plus 20V Li-Ion batteries.

Summary of Contents for ABP1815MA









































































































































































Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands

ALDI ABP1815MA, Instruction Manual

Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands