ALDI ABP1815MA Instruction Manual Download Page 126

Page: 126 / 168

AFTER SALES SUPPORT

1300 889 028 (toll free)

e-mail:

[email protected]

CLP18WA.9 • 2323 • 05/2019

MODEL No.:

CLP18WA.9 • 2323 • 05/2019

1. Application

20V Li-Ion Cordless LED Torch

2. Package Content List

First time users or inexperienced operators pay particular attention to the

operation of the 20V Li-Ion Cordless LED Torch, including details of starting

and stopping and correct use of the 20V Li-Ion Cordless LED Torch on pages

10-13, as well as the maintenance instructions on page 14.

Intended use of 20V Li-Ion LED torch

NOTE:

This product is for private domestic DIY use only. It is not suitable for

commercial or trade use.

This 20V Li-Ion Cordless LED Torch is used for lighting.

1 x 20V Li-Ion Cordless LED Torch Skin

1 x Belt clip + assembly screw

(not fitted)

1 x Hanging hook (fitted)

1 x Instruction Manual

1 x Warranty Card

• Remove all packing materials

• Ensure all parts on the contents

list are present

• Check the appliance, and all

accessories for transportation

damages

WARNING!

Please read and understand this instruction manual

before use and keep it for your future reference. Your power tool

should only be passed on together with this instruction manual.

WARNING!

To reduce risk of injury, only use the supplied battery or

any 20V Li-Ion Xfinity Plus batteries. Other type of battery packs may

burst causing personal injury and damage. The battery pack must be

recharged only with the supplied 20V Li-Ion charger, or any ALDI 20V

Li-Ion Xfinity Plus charger.

Summary of Contents for ABP1815MA









































































































































































Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands

ALDI ABP1815MA, Instruction Manual

Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands