ALDI ABP1815MA Instruction Manual Download Page 144

Page: 144 / 168

AFTER SALES SUPPORT

1300 889 028 (toll free)

e-mail:

[email protected]

TRD18SA.9 • 2323 • 05/2019

MODEL No.:

TRD18SA.9 • 2323 • 05/2019

1. Application

20V Li-Ion Bluetooth Speaker

2. Package Content List

First time users or inexperienced operators pay particular attention to the

operation of the 20V Li-Ion Bluetooth Speaker, including details of starting

and stopping and correct use of the 20V Li-Ion Bluetooth Speaker on pages

11-12, as well as the maintenance instructions on page 13.

Intended use of 20V Li-Ion Bluetooth Speaker

NOTE:

This product is for private domestic DIY use only. It is not suitable for

commercial or trade use.

The 20V Li-Ion Bluetooth Speaker is intended for playing music or amplifying

the sound by connecting other Bluetooth-enabled electronic devices.

1 x 20V Li-Ion Bluetooth Speaker

1 x Instruction manual

1 x Warranty Card & Certificate

• Remove all packing materials

• Ensure all parts on the contents

list are present

• Check the appliance, and all

accessories for transportation

damages

WARNING!

Please read and understand this instruction manual

before use and keep it for your future reference. Your product should

only be passed on together with this instruction manual.

WARNING!

To reduce risk of injury, only use the supplied 20V Li-Ion

battery or charger or any ALDI Xfinity Plus range of 20V Li-Ion battery

packs. Other type of battery packs may burst causing personal injury

and damage. The battery pack must be charged using with ALDI

Xfinity Plus 20V Li-Ion battery chargers.

Summary of Contents for ABP1815MA









































































































































































Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands

ALDI ABP1815MA, Instruction Manual

Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands