ALDI ABP1815MA Instruction Manual Download Page 10

Page: 10 / 168

AFTER SALES SUPPORT

1300 889 028 (toll free)

e-mail:

MODEL No.:

[email protected]

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

5. General safety warning

General Safety Warnings

WARNING Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

- This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance

by a person responsible for their safety.

- Children should be supervised to ensure that they do not play

with the appliance.

If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons in

order to avoid a hazard.

Additional safety instructions for your Battery Charger

1. Before charging, read the instructions.

2. For charge Li-ion battery pack only.

3. Do not charge a leaking battery.

4. Do not use chargers for works other than those for which they

are designed.

5. Before charging, ensure your charger is matching the local AC

supply.

6. The charging device must be protected from moisture.

7. Do not use the charging device in the open.

8. Do not short out the contacts of battery or charger.

9. Respect the polarity “+/-“ when charging.

10. Do not open the unit and keep out of the reach of children.

11. Do not charge the batteries of other manufactures or ill-suited

models.

Summary of Contents for ABP1815MA









































































































































































Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands

ALDI ABP1815MA, Instruction Manual

Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands