ALDI ABP1815MA Instruction Manual Download Page 130

Page: 130 / 168

AFTER SALES SUPPORT

1300 889 028 (toll free)

e-mail:

[email protected]

CLP18WA.9 • 2323 • 05/2019

MODEL No.:

CLP18WA.9 • 2323 • 05/2019

completely worn out. The battery may explode in fire.

6. Do not operate portable hand-held light or charging

stand/transformer near flammable liquids or in gaseous

or explosive atmospheres.

Internal sparks may ignite fumes.

7. To reduce the risk of electric shock, do not put portable

hand-held light in water or other liquid.

Do not place or

store portable hand-held light where it can fall or be pulled into

a tub or sink.

8. Do not permit children to use portable hand-held light

unsupervised. It is not a toy.

The temperature of the bulb

will become hot after being on only a short period of time. This

hot temperature can cause burn injury if touched.

9. DO NOT USE OR PERMIT USE OF PORTABLE HAND-HELD

LIGHT IN BED OR SLEEPING BAGS. This portable hand-held

light lens can melt fabric and a burn injury could result.

10. Keep light dry, clean, and free from oil and grease.

Always

use a clean cloth when cleaning. Never use brake fluid, gasoline,

petroleum-base products or any strong solvent to clean the

portable hand-held light.

11. The light source of this luminaire is not replaceable;

when the light source reaches its end of life the whole

luminaire shall be replaced.

Summary of Contents for ABP1815MA









































































































































































Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands

ALDI ABP1815MA, Instruction Manual

Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands