ALDI ABP1815MA Instruction Manual Download Page 154

Page: 154 / 168

AFTER SALES SUPPORT

1300 889 028 (toll free)

e-mail:

[email protected]

TRD18SA.9 • 2323 • 05/2019

MODEL No.:

TRD18SA.9 • 2323 • 05/2019

What your 5 year warranty means

Great care has gone into the manufacture of this product and it

should therefore provide you with years of good service when used

properly.

In the event of product failure within its intended use over the course

of as quickly as possible once it has been brought to our attention.

In the unlikely event of such an occurrence, or if you require any

information about the product please contact us via our after sales

support services, details of which can be found in this manual and on

the product itself. After Sales Support TEL: 1300 889 028

Service Support

If you have any issues with the operation of your product, please call us

on 1300 889 028 for advice, or email us at [email protected]

11.Environmental protection

Recycle unwanted materials instead of disposing of them

as waste. All tools, hoses and packaging should be sorted,

taken to the local recycling centre and disposed of in an

environmentally safe way.

Summary of Contents for ABP1815MA









































































































































































Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands

ALDI ABP1815MA, Instruction Manual

Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands