ALDI ABP1815MA Instruction Manual Download Page 37

Page: 37 / 168

AFTER SALES SUPPORT

1300 889 028 (toll free)

MODEL No.:

CDT218XA.9 • 2323 • 05/2019

e-mail:

[email protected]

Gear 2

High speed range: for working with small drilling diameter

WARNING: To prevent gear damage, always allow the

chuck to come to a complete stop before changing the

direction of rotation or the two-speed gear selector.

8.5 Chuck Adjustment (See Fig. F)

1. Open the keyless chuck (1) by unscrewing it in an anti-clockwise

direction, holding the drill/driver as shown in Fig F. Do this sufficiently

enough to allow the drill/driver bit to enter the jaws of the chuck.

2. Ensure the drill/driver bit is fully inserted, so that the chuck jaws

grip the straight section of the bit.Rotate the keyless chuck (1) clock-

wise until the jaws tighten on the drill/driver bit.The collar of the

chuck needs to be tightened firmly to ensure the drill/driver bit is held

securely.

To remove the drill/driver bit, rotate sharply the chuck in an

anticlockwise direction, sufficiently enough to allow the drill/driver

bit to be removed.

OPEN

Summary of Contents for ABP1815MA









































































































































































Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands

ALDI ABP1815MA, Instruction Manual

Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands