ALDI ABP1815MA Instruction Manual Download Page 152

Page: 152 / 168

AFTER SALES SUPPORT

1300 889 028 (toll free)

e-mail:

[email protected]

TRD18SA.9 • 2323 • 05/2019

MODEL No.:

TRD18SA.9 • 2323 • 05/2019

9. Maintenance

Warning! Always ensure that the 20V Li-Ion Bluetooth

speaker is switched off and the battery pack is removed

before making any adjustment.

Your Bluetooth speaker requires no additional lubrication or

maintenance.

There are no user serviceable parts in your Bluetooth speaker. Never

use water or chemical cleaners to clean your Bluetooth speaker.

Wipe clean with a dry cloth. Always store in a cool, dry place.

Storage & Transport

When not in use, the Bluetooth speaker should be stored in a dry,

frost free location not within the reach of children.

When storing or transporting the Bluetooth speaker ensure the

battery is detached from the speaker. This prevents any accidental

starting of the Bluetooth speaker.

For Battery tools

The ambient temperature range for the use and storage of tool and

battery is 0°C-45°C.

The recommended ambient temperature range for the charging

system during charging is 0°C-40°C.

Summary of Contents for ABP1815MA









































































































































































Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands

ALDI ABP1815MA, Instruction Manual

Search results

Summary of Contents for ABP1815MA

Reviews:

Related manuals for ABP1815MA

Brands by name

Popular brands